Please note: You are viewing the unstyled version of this website. Either your browser does not support CSS (cascading style sheets) or it has been disabled. Skip navigation.

DTAG: A Digital Acoustic Recording Tag

   Print Change text to small (default) Change text to medium Change text to large

Tag developers Mark Johnson (right) and Peter Tyack (left) with the DTAG. (WHOI)

Enlarge Image

The DTAG components. (WHOI)

Enlarge Image

The DTAG components assembled. (WHOI)

Enlarge Image

The tag completely assembled with casing. (WHOI)

Enlarge Image

The DTAG fully assembled with casing and suction cups, ready to be attached with a hand held pole. (Marcus Ballardini, BluWest)

Enlarge Image

Tagging of a Northern Right Whale in the Bay of Fundy using a cantilever pole. (WHOI, NMFS Permit #981-1707, BOF2001)

Definitive studies on the response of marine mammals to anthropogenic sound are hampered by the short surface time and deep-diving lifestyle of many species. A novel archival tag, called the DTAG, has been developed to monitor the behavior of marine mammals, and their response to sound, continuously throughout the dive cycle. The tag contains a large array of solid-state memory and records continuously from a built-in hydrophone and suite of sensors. The sensors sample the orientation of the animal in three dimensions with sufficient speed and resolution to capture individual fluke strokes. Audio and sensor recording is synchronous so the relative timing of sounds and motion can be determined precisely (Johnson & Tyack 2003).

  • records audio, pitch, roll, heading and depth
  • 6.6 GByte of memory
  • 48-192 kHz audio sampling rate
  • 50 Hz sensor sampling rate
  • 1-4 hydrophone channels
  • loss-less compression gives up to 24 hour recording
  • rechargeable battery
  • 300g weight in air
  • suction cup attachment
  • infra-red data offload

The DTAG is noninvasive and is attached to the whale with 4 silicone suction cups using a 12 m cantilevered carbon fiber pole or a handheld carbon fiber pole.  With the use of the poles, the tag is delivered without encroaching over the flukes of the animal (Johnson & Tyack 2003).  The tags are programmed to release from the animal by venting the suction cups at the end of the recording time if they are still attached.   A VHF beacon in the tag aids in tracking and recovering the device.  Once recovered, the tag data is off-loaded to a computer, checked for errors and archived (Tyack 2006).

Johnson, M. P. and P. L. Tyack (2003). "A Digital Acoutic Recording Tag for Measuring the Response of Wild Marine Mammals to Sound." IEEE Journal of Oceanic Engineering 28(1): 3-12.

Tyack, P. L., M. Johnson, et al. (2006). "Extreme diving of beaked whales." Journal of Experimental Biology 209: 4238-4253.


Last updated: May 12, 2017

whoi logo

Copyright ©2007 Woods Hole Oceanographic Institution, All Rights Reserved, Privacy Policy.
Problems or questions about the site, please contact