Back to Woods Hole Oceanographic Institution's Homepage
true expositive en-US Lonny Lippsett WHOI

Rebuilding Alvin: Loral O'Hara

A series on the people reassembling the iconic sub

SHARE THIS:   TOOLS: print this page

Since the beginning of 2011, Alvin, the U.S. science community’s only human-occupied submersible dedicated to deep-sea research, has been undergoing a thorough overhaul and upgrade that will enhance its capabilities. The improvements include a new personnel sphere, updated command-and-control systems, enhanced lighting and high-definition imaging systems, new syntactic foam to provide buoyancy, and more and larger viewports, or windows.

The centerpiece is a larger personnel sphere with improved interior design to enhance the comfort of pilots and researchers who will occupy it. The titanium sphere is also designed to withstand pressure at depths of 6.5 kilometers (4 miles), with the eventual goal of allowing Alvin to dive beyond its current 4.5-kilometer (2.8-mile) diving capacity.

Now in the final stages of the first phase of the upgrade, the iconic sub is being painstakingly reassembled, piece by piece, by a one-of-a-kind team of engineers, technicians, and pilots at Woods Hole Oceanographic Institution (WHOI). They also carefully inspect and test each component to ensure its reliability and the safety of those who will use to sub to explore the depths.

Here, engineer Loral O'Hara describes designing the racks that will hold most of the pressure housings that protect Alvin's electronics:

 

In this picture you’re looking toward Alvin’s bow. The personnel sphere is off toward the left, past the piece of the frame in the background. We rebuilt the forward portion of the vehicle’s frame, where the sphere will be, because the new sphere is bigger.

Here I was working with Tony Delane, a welder, to install pressure housing racks in the aft bay. The aft bay takes up roughly the aft third of the vehicle. I designed the racks. They will hold most of Alvin’s pressure housings, the titanium bottles that house the electronics for propulsion and for controlling the vehicle, cameras and lighting, and data handling.

On the old Alvin, many of the power and data components were inside the personnel sphere. We freed up a lot of space inside the sphere by moving those components into pressure housings outside the sphere, but we also had to find a place to put all those housings. We had this big space in the aft bay, but there wasn’t a lot of structure to mount things back there.

Instead of adding a lot of heavy structure to support the housings, we made the housings become part of the structure. This is the starboard rack. There’s another one just like it on the port side. The bottles will fit in the large holes in the racks so they span across the vehicle from one rack to the other, so they are actually part of the structure.

A lot of what drove this design was that at sea, the crew has to be able to pull out the contents of the housings to service them. So you had to be able to access the ends of the bottles.

The racks are a solid, high-strength plastic called polyethylene. If we made them of titanium, we’d have to add an equivalent amount of foam or some other buoyancy to float it. This plastic floats itself. All of this was fabricated here. The plastic came in as a big sheet, and then Tim Kling cut out all the parts with the water jet.

I came to WHOI in 2009. I was only planning to stay here for a little while, because I had another job lined up. But then I started working on the Alvin project and got more involved in that. When it came time to leave, I decided to stay and finish the project. Three years later… [laughs].

I’d love to go down in Alvin. Before I came here, I was studying rocket propulsion. The motivation for me is the same. I love exploration, particularly when it involves people. What I want to do with my life is build vehicles that let people work and live in places that are either inaccessible or accessible to only a few.

 

Alvin is owned by the U.S. Navy and operated by WHOI. The current upgrade has been funded largely by the National Science Foundation, with support from private donations to WHOI.

From the Series

REBUILDING ALVIN

Articles Featuring

Keywords

bottles

Woods Hole Oceanographic Institution is the world's leading non-profit oceanographic research organization. Our mission is to explore and understand the ocean and to educate scientists, students, decision-makers, and the public.
© Woods Hole Oceanographic Institution. Online edition: ISSN 1559-1263. All rights reserved