Please note: You are viewing the unstyled version of this website. Either your browser does not support CSS (cascading style sheets) or it has been disabled. Skip navigation.

ITP22 Data Processing

  Email    Print  PDF  Change text to small (default) Change text to medium Change text to large

Enlarge Image

ITP Surface Buoy Status


Enlarge Image

ITP profiler engineering data.


Enlarge Image

Top: number of bad points removed, Middle: variance of verticle difference of temperature and salinity in step region for up-going profiles, Bottom: temperature lag.


Enlarge Image

Top: conductivity lag, Middle: conductivity thermal mass amplitude correction, Bottom: conductivity thermal mass lag correction


Enlarge Image

Top: down pressure deviation correction, Middle: salinity ratio adjustment, Bottom: Number of filtered spikes


The 14 profiles that were recovered from the ITP were processed according to the procedures described in the ITP Updated Data Processing Procedures.  The processing parameters for ITP 22 are shown in the figures to the right.  Despite successful test communications with the profiler on the ice, nothing was heard afterwards from the profiler for the first six weeks until September 20 when the surface package received a ring from the profiler and 14 stored profiles were recovered.  No other rings from the profiler were ever received.  The small amount of CTD data that was received was excellent quality, but of short duration.

See the Data Products tab to the left for descriptions of the three levels (I, II, III) of data processing and to access all data.



Last updated: October 23, 2014
 


whoi logo

Copyright ©2007 Woods Hole Oceanographic Institution, All Rights Reserved, Privacy Policy.
Problems or questions about the site, please contact webdev@whoi.edu