Woods Hole Oceanographic Institution

Cruise Planning Synopsis


AT18-16

Ship

R/V Atlantis

Vehicles

ROV Jason
- added ROV Jason on Oct 4, 2011 9:56 AM by Eric Benway

Cruise Party

Chris German: Chief Scientist, Principal Investigator
Woods Hole Oceanographic Institution Clark South 276, MS#24 Woods Hole, Ma. USA 02543
+1 508 289 2853
cgerman@whoi.edu
- added Chris German as Chief Scientist on Oct 4, 2011 9:56 AM by Eric Benway
- added Chris German as Principal Investigator on Oct 4, 2011 9:56 AM by Eric Benway

Departure: Jan 3, 2012

Port Everglads

Arrival: Jan 25, 2012

Key West

Operations Area

Mid Cayman Rise
- Mid Cayman Rise on Oct 4, 2011 9:56 AM by Eric Benway
Lat/Lon: 18° 30.0′ N / 81° 45.0′ W
- set lat to 18° 30.0′ N, set lon to 81° 45.0′ W on Oct 4, 2011 9:56 AM by Eric Benway
Depth Range: 2300 / 5000
- set min to 2300, set max to 5000 on Oct 4, 2011 9:56 AM by Eric Benway
Will the vessel be operating within 200 NM of a foreign country? Grand Cayman
- Grand Cayman on Oct 4, 2011 9:56 AM by Eric Benway
Are visas or special travel documents required? no
- set to no on Oct 4, 2011 9:56 AM by Eric Benway

Science Objectives

This proposal will seek to charaterize the geology, geochemistry, microbiology and macrobiology of two new hydrothermal fields on the Mid Cayman Rise - the Piccard hydrothermal field at ~5000m depth near 18deg33min N, 81deg 43minW and the Von Damm hydrothermal field at ~2300m depth near 18deg23min N, 81deg48minW
- This proposal will seek to charaterize the geology, geochemistry, microbiology and macrobiology of two new hydrothermal fields on the Mid Cayman Rise - the Piccard hydrothermal field at ~5000m depth near 18deg33min N, 81deg 43minW and the Von Damm hydrothermal field at ~2300m depth near 18deg23min N, 81deg48minW on Oct 4, 2011 9:56 AM by Eric Benway

Science Activities

1) Deployment of transponders for LBL at one or both sites
2) Jason-based Geophysical surveys (Reson + Gravity ± Magnetics) at each site (24h)
3) Jason-based sampling (5-6 days at each site) to include: fluids (Seewald +/- Major pairs); sulfides (young with fluids and older); rocks; push cores; microbial mats (pumps including Chip Breier's SUPR sampler); macro-biology (shrimp, tubeworms, gastropods, other vent-endemic fauna, fish)
4) CTD operations including use of SUPR sampler mounted on CTD-rosette
5) Multibeam mapping of seafloor +/- imaging for plumes using new ship's multibeam (effective to >2000m on Juan de Fuca in 2011)
- 1) Deployment of transponders for LBL at one or both sites
2) Jason-based Geophysical surveys (Reson + Gravity ± Magnetics) at each site (24h)
3) Jason-based sampling (5-6 days at each site) to include: fluids (Seewald +/- Major pairs); sulfides (young with fluids and older); rocks; push cores; microbial mats (pumps including Chip Breier's SUPR sampler); macro-biology (shrimp, tubeworms, gastropods, other vent-endemic fauna, fish)
4) CTD operations including use of SUPR sampler mounted on CTD-rosette
5) Multibeam mapping of seafloor +/- imaging for plumes using new ship's multibeam (effective to >2000m on Juan de Fuca in 2011)
on Oct 4, 2011 9:56 AM by Eric Benway

Additional Info

Pre-cruise Planning Meeting: Teleconference/Visit WHOI
- Teleconference/Visit WHOI on Oct 4, 2011 9:56 AM by Eric Benway
- on Oct 4, 2011 9:56 AM by Eric Benway

Stations:

  Von Damm
  Distance: null
  Days: 7
  Latitude: 18° 23.0’ N
  Longitude: 81° 48.0’ W

  Piccard
  Distance: null
  Days: 7
  Latitude: 18° 33.0’ N
  Longitude: 81° 43.0’ W
- added Name: Von Damm, Lat: 18° 23.0’ N, Lon: 81° 48.0’ W, Distance: , Days: 7
added Name: Piccard, Lat: 18° 33.0’ N, Lon: 81° 43.0’ W, Distance: , Days: 7 on Oct 4, 2011 9:56 AM by Eric Benway

Supporting documentation:

»BasicMaps.ppt
- added BasicMaps.ppt on Oct 4, 2011 9:56 AM by Eric Benway

Funding

Funding Agency: NASA
Grant or contract number: NNX09AB75G
Funding Agency: NSF
Grant or contract number: OCE-0926805
Funding Agency: NSF
Grant or contract number: OCE-1061863

Scientific Instrumentation for R/V Atlantis

Shipboard Equipment

12 kHz Pinger for Wire Use,
Bathymetry System 12 kHz,
Deionized Water System,
Fume Hood,
Multibeam ,
Navigation - Heading,
Navigation - Position,
Relay Transponder for Wire Use,
Sippican XBT System (Mark 21),
Transponder Navigation - Sonardyne USBL,
Science Underway Seawater System,
Gravimeter,
Bathymetry System 3.5 kHz
-added 12 kHz Pinger for Wire Use on Oct 4, 2011 9:56 AM by Eric Benway
-added Bathymetry System 12 kHz on Oct 4, 2011 9:56 AM by Eric Benway
-added Deionized Water System on Oct 4, 2011 9:56 AM by Eric Benway
-added Fume Hood on Oct 4, 2011 9:56 AM by Eric Benway
-added Multibeam on Oct 4, 2011 9:56 AM by Eric Benway
-added Navigation - Heading on Oct 4, 2011 9:56 AM by Eric Benway
-added Navigation - Position on Oct 4, 2011 9:56 AM by Eric Benway
-added Relay Transponder for Wire Use on Oct 4, 2011 9:56 AM by Eric Benway
-added Sippican XBT System (Mark 21) on Oct 4, 2011 9:56 AM by Eric Benway
-added Transponder Navigation - Sonardyne USBL on Oct 4, 2011 9:56 AM by Eric Benway
-added Science Underway Seawater System on Oct 4, 2011 9:56 AM by Eric Benway
-added Gravimeter on Oct 4, 2011 9:56 AM by Eric Benway
-added Bathymetry System 3.5 kHz on Oct 4, 2011 9:56 AM by Eric Benway

Shipboard Communication

Basic Internet access via HiSeasNet
-added Basic Internet access via HiSeasNet on Oct 4, 2011 9:56 AM by Eric Benway

CTD/Water Sampling

911+ Rosette 24-position, 10-liter bottle Rosette with dual T/C sensors,
SBE43 oxygen sensor,
Seapoint STM turbidity sensor,
Wet Labs C*Star transmissometer (660nm wavelength),
Wet Labs ECO-AFL fluorometer
-added 911+ Rosette 24-position, 10-liter bottle Rosette with dual T/C sensors on Oct 4, 2011 9:56 AM by Eric Benway
-added SBE43 oxygen sensor on Oct 4, 2011 9:56 AM by Eric Benway
-added Seapoint STM turbidity sensor on Oct 4, 2011 9:56 AM by Eric Benway
-added Wet Labs C*Star transmissometer (660nm wavelength) on Oct 4, 2011 9:56 AM by Eric Benway
-added Wet Labs ECO-AFL fluorometer on Oct 4, 2011 9:56 AM by Eric Benway

Critical CTD Sensors

CTD-Related Equipment

Lowered Acoustic Doppler Current Profiler (LADCP)
-added Lowered Acoustic Doppler Current Profiler (LADCP) on Oct 4, 2011 9:56 AM by Eric Benway

Sample Storage

Climate Controlled Walk-in,
Freezer -70°C 3.2 cu. ft. ea.,
Freezer -70°C 25 cu. ft.,
Refrigerator 8.6 cu. ft.,
Scientific Walk-in Freezer
-added Climate Controlled Walk-in on Oct 4, 2011 9:56 AM by Eric Benway
-added Freezer -70°C 3.2 cu. ft. ea. on Oct 4, 2011 9:56 AM by Eric Benway
-added Freezer -70°C 25 cu. ft. on Oct 4, 2011 9:56 AM by Eric Benway
-added Refrigerator 8.6 cu. ft. on Oct 4, 2011 9:56 AM by Eric Benway
-added Scientific Walk-in Freezer on Oct 4, 2011 9:56 AM by Eric Benway
Storage Notes: Microbiology: we also need a -20°C freezer
- added Microbiology: we also need a -20°C freezer on Oct 4, 2011 9:56 AM by Eric Benway

Navigation

Will you be using Long Base Line (LBL) navigation? no
- added no on Oct 4, 2011 9:56 AM by Eric Benway
How many nets? null
How many tansponders? null
Will you be using Ultra-short baseline (USBL) navigation?no
- added no on Oct 4, 2011 9:56 AM by Eric Benway

Navigation

GPS,
LBL,
USBL
-added GPS on Oct 4, 2011 9:56 AM by Eric Benway
-added LBL on Oct 4, 2011 9:56 AM by Eric Benway
-added USBL on Oct 4, 2011 9:56 AM by Eric Benway
Navigation Notes: Both LBL and USBL useful for Jason nav at these depths
- added Both LBL and USBL useful for Jason nav at these depths on Oct 4, 2011 9:56 AM by Eric Benway

Winches

CTD Winch with .322" Electro-mechanical wire,
Trawl Winch with .681 fiber optic
-added CTD Winch with .322" Electro-mechanical wire on Oct 4, 2011 9:56 AM by Eric Benway
-added Trawl Winch with .681 fiber optic on Oct 4, 2011 9:56 AM by Eric Benway
Winch Notes: Only Jason and CTD operations are anticipated
- changed from Only Jason and CTD operations are anticipated to Only Jason and CTD operations are anticipated this cruise on Oct 4, 2011 9:57 AM by Eric Benway
- changed from Only Jason and CTD operations are anticipated this cruise to Only Jason and CTD operations are anticipated on Oct 4, 2011 9:56 AM by Eric Benway
- added Only Jason and CTD operations are anticipated this cruise on Oct 4, 2011 9:56 AM by Eric Benway

Wire use and application

CTD Winch with .322" Electro-mechanical wire,
Trawl Winch with .681 fiber optic
-added CTD Winch with .322" Electro-mechanical wire on Oct 4, 2011 9:56 AM by Eric Benway
-added Trawl Winch with .681 fiber optic on Oct 4, 2011 9:56 AM by Eric Benway
Winch Notes: SUPR sampler (rated to 5500 m) mounted on CTD rosette frame or on Jason. For CTD ops, we would like to use the adsl model package put together by Marshal Swartz - to do so all 3 conducting wires of the CTD seacable must have full conductivity.

On the CTD the SUPR sampler will have these weights: 60 kg in water, 100 kg in air
On Jason the SUPR sampler will have 2 configurations
Config. A (1 unit) 15 kg in water, 30 kg in air
Config. B (3 units) 45 kg in water, 118 kg in air - includes 28 L of water

The Mat Sampler (rated to 5500 m) (Breier's) will also be used by Huber and Breier on Jason and weighs 25 kg in water and 50 kg in air.



- changed from SUPR sampler (rated to 5500 m) mounted on CTD rosette frame or on Jason. For CTD ops, we would like to use the adsl model package put together by Marshal Swartz - to do so all 3 conducting wires of the CTD seacable must have full conductivity.

On the CTD the SUPR sampler will have these weights: 60 kg in water, 100 kg in air
On Jason the SUPR sampler will have 2 configurations
Config. A (1 unit) 15 kg in water, 30 kg in air
Config. B (3 units) 45 kg in water, 118 kg in air - includes 28 L of water

The Mat Sampler (rated to 5500 m) (Breier's) will also be used by Huber and Breier on Jason and weighs 25 kg in water and 50 kg in air.



to SUPR sampler mounted on CTD rosette frame or on Jason. For CTD ops, we would like to use the adsl model package put together by Marshal Swartz - to do so all 3 conducting wires of the CTD seacable must have full conductivity.

On the CTD the SUPR sampler will have these weights: 60 kg in water, 100 kg in air
On Jason the SUPR sampler will have 2 configurations
Config. A (1 unit) 15 kg in water, 30 kg in air
Config. B (3 units) 45 kg in water, 118 kg in air - includes 28 L of water

The Mat Sampler (Breier's) will also be used by Huber and Breier on Jason and weighs 25 kg in water and 50 kg in air.



on Oct 4, 2011 9:57 AM by Eric Benway
- changed from SUPR sampler mounted on CTD rosette frame or on Jason. For CTD ops, we would like to use the adsl model package put together by Marshal Swartz - to do so all 3 conducting wires of the CTD seacable must have full conductivity.

On the CTD the SUPR sampler will have these weights: 60 kg in water, 100 kg in air
On Jason the SUPR sampler will have 2 configurations
Config. A (1 unit) 15 kg in water, 30 kg in air
Config. B (3 units) 45 kg in water, 118 kg in air - includes 28 L of water

The Mat Sampler (Breier's) will also be used by Huber and Breier on Jason and weighs 25 kg in water and 50 kg in air.



to SUPR sampler (rated to 5500 m) mounted on CTD rosette frame or on Jason. For CTD ops, we would like to use the adsl model package put together by Marshal Swartz - to do so all 3 conducting wires of the CTD seacable must have full conductivity.

On the CTD the SUPR sampler will have these weights: 60 kg in water, 100 kg in air
On Jason the SUPR sampler will have 2 configurations
Config. A (1 unit) 15 kg in water, 30 kg in air
Config. B (3 units) 45 kg in water, 118 kg in air - includes 28 L of water

The Mat Sampler (rated to 5500 m) (Breier's) will also be used by Huber and Breier on Jason and weighs 25 kg in water and 50 kg in air.



on Oct 4, 2011 9:56 AM by Eric Benway
- added SUPR sampler mounted on CTD rosette frame or on Jason. For CTD ops, we would like to use the adsl model package put together by Marshal Swartz - to do so all 3 conducting wires of the CTD seacable must have full conductivity.

On the CTD the SUPR sampler will have these weights: 60 kg in water, 100 kg in air
On Jason the SUPR sampler will have 2 configurations
Config. A (1 unit) 15 kg in water, 30 kg in air
Config. B (3 units) 45 kg in water, 118 kg in air - includes 28 L of water

The Mat Sampler (Breier's) will also be used by Huber and Breier on Jason and weighs 25 kg in water and 50 kg in air.



on Oct 4, 2011 9:56 AM by Eric Benway

Standard Oceanographic Cables

Slip ring required? no
Non-standard wire required? no
Traction winch required? no

Specialized Deck Equipment

Mooring Deployment/Recovery Equipment Required: no Type: 
Cruise Specific Science Winch Required: no Type: 
Nets Required: no Type: 

Over the Side Equipment

Will you be bringing any equipment (winches, blocks, etc.) that lowers instruments over the side? no

Special Requirements

Elecrical Power: no Identify 
Equipment Handling: no Identify: 
Inter/intraship Communications: no Identify: 
Science Stowage: no Identify: 
Water: no Identify: 

Additional Cruise Items/Activities

Explosive Devices:no
Portable Air Compressors:no
Flammable Gases:yes
Small Boat Operations:no
SCUBA Diving Operations:no

Hazardous Material

Will hazardous material be utilized?yes
- added yes on Oct 4, 2011 9:56 AM by Eric Benway
Describe deployment method and quantity:

Conc HCl

Nitric acid

Silver Nitrate

Sodium Sulfide

Zinc acetate

pH buffers

 

Acetone

RNA later

ethanol

70% ethanol

formalin

paraformaldehyde

formaldehyde

dithothrietol

gluteraldehyde

histological fixatives?

 

Gas - N2

Gas - Air

Gas - H2

Gas - He

Gas - stds

Gas - propane

Gas (80H2/20CO2)

 

Nitrocellulose membrane filters

- changed from

Conc HCl

Nitric acid

Silver Nitrate

Sodium Sulfide

Zinc acetate

pH buffers

 

Acetone

RNA later

ethanol

70% ethanol

formalin

paraformaldehyde

formaldehyde

dithothrietol

gluteraldehyde

histological fixatives?

 

Gas - N2

Gas - Air

Gas - H2

Gas - He

Gas - stds

Gas - propane

Gas (80H2/20CO2)

 

Nitrocellulose membrane filters

to RNALater
ethanol
formaldehyde
paraformaldehyde
hydrocholoric acid
nitric acid
nitro cellulose membrane filters
on Oct 4, 2011 9:57 AM by Eric Benway
- changed from RNALater
ethanol
formaldehyde
paraformaldehyde
hydrocholoric acid
nitric acid
nitro cellulose membrane filters
to

Conc HCl

Nitric acid

Silver Nitrate

Sodium Sulfide

Zinc acetate

pH buffers

 

Acetone

RNA later

ethanol

70% ethanol

formalin

paraformaldehyde

formaldehyde

dithothrietol

gluteraldehyde

histological fixatives?

 

Gas - N2

Gas - Air

Gas - H2

Gas - He

Gas - stds

Gas - propane

Gas (80H2/20CO2)

 

Nitrocellulose membrane filters

on Oct 4, 2011 9:56 AM by Eric Benway
- added RNALater
ethanol
formaldehyde
paraformaldehyde
hydrocholoric acid
nitric acid
nitro cellulose membrane filters
on Oct 4, 2011 9:56 AM by Eric Benway

Radioactive Material

Radioiosotopes:no

Additional Information

Is night time work anticipated on this cruise?yes
- added yes on Oct 4, 2011 9:56 AM by Eric Benway
Specialized tech support (Seabeam, coring, other):
CTD operations will be led by J.Breier (AOP&E, WHOI)
We also anticipate wanting to conduct at least some multibeam surveys, over the known vent sites, to examine for active fluid flow signals using the new shipboard multi-beam, to be led by J.Kinsey (AOP&E, WHOI)
- added CTD operations will be led by J.Breier (AOP&E, WHOI)
We also anticipate wanting to conduct at least some multibeam surveys, over the known vent sites, to examine for active fluid flow signals using the new shipboard multi-beam, to be led by J.Kinsey (AOP&E, WHOI)
on Oct 4, 2011 9:56 AM by Eric Benway
Other required equipment and special needs:

Gravimeter (Kinsey)--- Need for shipboard gravimeter will not be finalized until Nov 2011.  J. Kinsey, the requesting scientist, runs the UNOLS gravimeter pool (from which this gravimeter will be supplied) and can thus handle all of the shipping and installation. Some SSSG support will be required for installation.  If installed, the gravimeter will ride the Atlantis back to Woods Hole and be off-loaded there.

- added

Gravimeter (Kinsey)--- Need for shipboard gravimeter will not be finalized until Nov 2011.  J. Kinsey, the requesting scientist, runs the UNOLS gravimeter pool (from which this gravimeter will be supplied) and can thus handle all of the shipping and installation. Some SSSG support will be required for installation.  If installed, the gravimeter will ride the Atlantis back to Woods Hole and be off-loaded there.

on Oct 4, 2011 9:56 AM by Eric Benway

Scientific Instrumentation for HOV Jason



Current Chart(s):

Site Survey

Will you provide detailed charts of the work area(s)?no
- added no on Oct 4, 2011 9:56 AM by Eric Benway
If no, willl you need R/V Atlantis to generate maps of the work area(s)?yes
- added yes on Oct 4, 2011 9:56 AM by Eric Benway
Will you need post-dive maps of the work area generated?yes
- added yes on Oct 4, 2011 9:56 AM by Eric Benway

Navigation

Will you be using Long Base Line (LBL) navigation? yes
- added yes on Oct 4, 2011 9:56 AM by Eric Benway
How many nets? 2
How many tansponders? 6
- added 6 on Oct 4, 2011 9:56 AM by Eric Benway
Will you be using Ultra-short baseline (USBL) navigation?yes
- added yes on Oct 4, 2011 9:56 AM by Eric Benway
Will you be using Doppler/GPS navigation? yes
- added yes on Oct 4, 2011 9:56 AM by Eric Benway
What type of samples do you expect to collect?Fluids (hi-T and diffuse); microbes; macrobiology - tube worms, gastropods, shrimp & fish; rocks (altered & fresh), sulfides (altered & fresh), push-cores
- added Fluids (hi-T and diffuse); microbes; macrobiology - tube worms, gastropods, shrimp & fish; rocks (altered & fresh), sulfides (altered & fresh), push-cores on Oct 4, 2011 9:56 AM by Eric Benway

Elevators

Will you be using elevators to transport samples to the surface?yes
- changed from no to yes on Oct 4, 2011 9:57 AM by Eric Benway
- added no on Oct 4, 2011 9:56 AM by Eric Benway
If yes, how many would you anticipate? 8
- added 8 on Oct 4, 2011 9:56 AM by Eric Benway

Cameras & Video

Video & Photo data
-added Video & Photo data on Oct 4, 2011 9:56 AM by Eric Benway

Science Supplied Equipment

Are you supplying equipment to be used on HOV Jason yes
- added yes on Oct 4, 2011 9:56 AM by Eric Benway
Has this equipment been used on Jason before? yes
- added yes on Oct 4, 2011 9:56 AM by Eric Benway
Please give a brief description of the equipment, its intended purpose, the cruise # it was last used on if any and its deployment method.
1) Jeff Seewald IGT fluid samplers
2) Chip Breier's SUPR sampler(s) - new variations on what has been used in previous years.
3) J. Kinsey: (3.1) submersible gravimeter; (3.2) additional paros depth sensor; (3.3) possible additional ADCPs on Medea.  Additional information already forwarded to Jason team.
- added 1) Jeff Seewald IGT fluid samplers
2) Chip Breier's SUPR sampler(s) - new variations on what has been used in previous years.
3) J. Kinsey: (3.1) submersible gravimeter; (3.2) additional paros depth sensor; (3.3) possible additional ADCPs on Medea.  Additional information already forwarded to Jason team.
on Oct 4, 2011 9:56 AM by Eric Benway
Does this equipment use an external pressure housing? yes
- added yes on Oct 4, 2011 9:56 AM by Eric Benway
If yes, what is the pressure rating?
and test pressure?
Has the pressure housing been tested per Alvin Pressure Test requirements? yes
- added yes on Oct 4, 2011 9:56 AM by Eric Benway
Pressure housing schematic with dimensions and include air and water weights.
Does the equipment have an associated computer or control panel for remote operation from the personnel sphere? yes
- added yes on Oct 4, 2011 9:56 AM by Eric Benway
Air weight of this equipment?
Does the equipment require data or a power interface from the vehicle? yes
- added yes on Oct 4, 2011 9:56 AM by Eric Benway
Does this equipment require hydraulic inputs from the vehicle? no
- added no on Oct 4, 2011 9:56 AM by Eric Benway
Hydraulic schematic of the equipment requirements.
Does this equipment require manipulation? yes
- added yes on Oct 4, 2011 9:56 AM by Eric Benway
If yes, please describe how the equipment is to be manipulated:
IGT fluid samplers require insertion in vent orifice for fluid collection
- added IGT fluid samplers require insertion in vent orifice for fluid collection on Oct 4, 2011 9:56 AM by Eric Benway
Will this equipment be deployed off the vehicle? no
- added no on Oct 4, 2011 9:56 AM by Eric Benway
If yes, please describe how the equipment is intended for deployment:
If yes, will the equipment be disconnected from the vehicle and left in situ? no
- added no on Oct 4, 2011 9:56 AM by Eric Benway
How long will the deployment be?
Will the equipment be recovered by the same vehicle? no
- added no on Oct 4, 2011 9:56 AM by Eric Benway
If recovering equipment deployed with another vehicle, provide pressure rating:
and test pressure:
Does this equipment use any glass spheres for either buoyancy or as pressure housings? no
- added no on Oct 4, 2011 9:56 AM by Eric Benway

Hazardous Material

Will hazardous material be utilized?yes
- added yes on Oct 4, 2011 9:56 AM by Eric Benway
Describe deployment method and quantity:
RNA later in SUPR sampler
- added RNA later in SUPR sampler on Oct 4, 2011 9:56 AM by Eric Benway

Additional Information

Brief operations description or comments:

Checklist & Notes

Checklist

U.S. Customs Form: no
- added no on Oct 4, 2011 10:01 AM by Eric Benway
Diplomatic Clearance: yes
- added yes on Oct 4, 2011 10:01 AM by Eric Benway
Date Submitted: Sep 4, 2011
- added Sep 4, 2011 on Oct 4, 2011 10:01 AM by Eric Benway
Date Approved:
Agent Information:
PORT EVERGLADES FL.
Master R/V Atlantis
Attn: Scientist's Name - AT18-16
Wilhelmsen's Ship Services
8030 N.W. 77 Court
Medley, FL   33166

Contact:
Edwin Delgado
Marine Manager
North America
Tel: 305-883-3829
Fax: 305-675-9260
Mobile:305-586-4803
Email: 'edwin.delgado@wilhelmsen.com'

AGENT NOTE: For all reply emails please use the following email address:
wss-mia-shipsagency@wilhelmsen.com  unless yourequire personal & confidential communication then please reply to 'edwin.delgado@wilhelmsen.com'

WHOI NOTE:  Agent and WHOI contacts should be copied on all communications.  It is requested that shipment information of any equipment be communicated to the Agent and WHOI contacts
- added PORT EVERGLADES FL.
Master R/V Atlantis
Attn: Scientist's Name - AT18-16
Wilhelmsen's Ship Services
8030 N.W. 77 Court
Medley, FL   33166

Contact:
Edwin Delgado
Marine Manager
North America
Tel: 305-883-3829
Fax: 305-675-9260
Mobile:305-586-4803
Email: 'edwin.delgado@wilhelmsen.com'

AGENT NOTE: For all reply emails please use the following email address:
wss-mia-shipsagency@wilhelmsen.com  unless yourequire personal & confidential communication then please reply to 'edwin.delgado@wilhelmsen.com'

WHOI NOTE:  Agent and WHOI contacts should be copied on all communications.  It is requested that shipment information of any equipment be communicated to the Agent and WHOI contacts
on Oct 4, 2011 10:01 AM by Eric Benway
Countries:
N/A
- added N/A on Oct 4, 2011 10:01 AM by Eric Benway
Notes:
No US Customs forms required.  This will be a US to US voyage - no foriegn port calls planned.
- added No US Customs forms required.  This will be a US to US voyage - no foriegn port calls planned. on Oct 4, 2011 10:01 AM by Eric Benway
Isotope Use Approval: no
- added no on Oct 4, 2011 10:01 AM by Eric Benway
Isotope Notes:
SCUBA Diving: no
- added no on Oct 4, 2011 10:01 AM by Eric Benway

Checklist

SSSG Tech:
Loading Port Everglades Dec 30 - Jan 2.
Science can pre ship items to agent Edwin Delgado in Port Everglades.
Pier can accept trucks directly to the vessel Dec 30 - Jan 2.
Jan 27 to Jan 29 ship will remain in Port Everglades for NSF inspection.   Atlantis will then transit directly back to WHOI for complete demobilzation. 
- added Loading Port Everglades Dec 30 - Jan 2.
Science can pre ship items to agent Edwin Delgado in Port Everglades.
Pier can accept trucks directly to the vessel Dec 30 - Jan 2.
Jan 27 to Jan 29 ship will remain in Port Everglades for NSF inspection.   Atlantis will then transit directly back to WHOI for complete demobilzation. 
on Oct 4, 2011 10:01 AM by Eric Benway